34-я международная научно-техническая конференция "Системы безопасности – 2025"·Проблемы автоматизации систем безопасностиУДК 614,84

ПОЖАРО- И ВЗРЫВООПАСНЫЕ ФАКТОРЫ И СТРАТЕГИИ ТУШЕНИЯ ПОЖАРОВ ЭЛЕКТРОМОБИЛЕЙ ВО ВЬЕТНАМЕ

FIRE AND EXPLOSION HAZARDS AND FIREFIGHTING STRATEGIES FOR ELECTRIC VEHICLES IN VIETNAMFIRE AND EXPLOSION HAZARDS AND FIREFIGHTING STRATEGIES FOR ELECTRIC VEHICLES IN VIETNAM

Нгуен Хыу Ан1,Ву Куанг Тханг1
  1. 1 Fire Safety Institute of the Ministry of Defense of Vietnam
19 октября 2025 3 просмотров 14 мин чтения
Аннотация

Возгорание и взрывы литий-ионных (Li-ion) аккумуляторов не только наносят значительный материальный ущерб, но и представляют серьёзную угрозу для жизни людей и окружающей среды. Такая ситуация создаёт немалые трудности для подразделений пожарной охраны и спасательных служб при предотвращении, контроле и эффективном тушении пожаров, связанных с аккумуляторами электромобилей. В статье проводится анализ конструкции аккумуляторов электромобилей, особенностей их пожаро- и взрывоопасности, а также характерных параметров возгораний литий-ионных батарей. Кроме того, оцениваются преимущества и недостатки некоторых распространённых огнетушащих веществ. На этой основе авторы предлагают соответствующие и реализуемые решения по тушению пожаров аккумуляторов электромобилей с учётом реальных условий во Вьетнаме.

#электромобили#литий-ионные аккумуляторы#пожаро- и взрывоопасные свойства#огнетушащие вещества#пожарная безопасность.
Abstract

The combustion and explosion of lithium-ion (Li-ion) batteries not only cause significant property damage but also pose serious risks to human life and the environment. This situation presents major challenges for the Fire Prevention, Fighting, and Rescue Police in proactively preventing, controlling, and effectively extinguishing fires involving electric vehicle batteries. This paper focuses on analyzing the structure of electric vehicle batteries, the fire and explosion hazards, and the characteristic parameters of Li-ion battery fires. It also evaluates the advantages and disadvantages of several commonly used extinguishing agents. Based on this analysis, the authors propose suitable and feasible firefighting solutions for electric vehicle battery fire incidents under practical conditions in Vietnam.

#Electric vehicles#Lithium-ion battery#Fire and explosion hazards#Firefighting agents#Fire safety.
Полный текст2490 слов

9) ПОЖАРО- И ВЗРЫВООПАСНЫЕ ФАКТОРЫ И СТРАТЕГИИ ТУШЕНИЯ ПОЖАРОВ ЭЛЕКТРОМОБИЛЕЙ ВО ВЬЕТНАМЕ

ИД: 2571 Авторы: Нгуен Хыу Ан | Ву Куанг Тханг |

Fire and explosion hazards and fire extinguishing methods for electric vehicles in Vietnam

Fires and explosions of lithium-ion (Li-ion) batteries not only cause significant material damage but also pose a serious threat to human life and the environment. This situation poses significant challenges for fire and rescue services in preventing, controlling, and effectively extinguishing fires involving electric vehicle batteries. Appropriate solutions for extinguishing electric vehicle battery fires are proposed, taking into account the actual conditions in Vietnam.

Keywords: electric vehicles; lithium-ion batteries; fire and explosion hazardous properties; fire extinguishing agents; fire safety.

ПОЖАРО- И ВЗРЫВООПАСНЫЕ ФАКТОРЫ И методы ТУШЕНИЯ ПОЖАРОВ ЭЛЕКТРОМОБИЛЕЙ ВО ВЬЕТНАМЕ

Возгорание и взрывы литий-ионных (Li-ion) аккумуляторов не только наносят значительный материальный ущерб, но и представляют серьёзную угрозу для жизни людей и окружающей среды. Такая ситуация создаёт немалые трудности для подразделений пожарной охраны и спасательных служб при предотвращении, контроле и эффективном тушении пожаров, связанных с аккумуляторами электромобилей. Предложены соответствующие решения по тушению пожаров аккумуляторов электромобилей с учётом реальных условий во Вьетнаме.

Ключевые слова: электромобили; литий-ионные аккумуляторы; пожаро- и взрывоопасные свойства; огнетушащие вещества; пожарная безопасность.

1. Problem Statement

According to Precedence Research (2024), the global electric vehicle (EV) market is projected to reach approximately USD 2,108.80 billion by 2033, with an estimated compound annual growth rate (CAGR) of 23.42 % during the period 2024 – 2033. Global EV sales surged from 6,77 million units in 2021 to 10,52 million units in 2022, reflecting a clear transition from fossil fuel-powered vehicles to environmentally friendly transportation modes [4].

In Vietnam, the EV market has been emerging as a vital component of the national automotive industry, aligning with the global development trend. The year 2024 has witnessed a rapid transition toward electric mobility, with VinFast playing a pioneering role and an increasing participation of both domestic assemblers and imported vehicle manufacturers. According to Mordor Intelligence (2024), the Vietnam electric vehicle market is estimated to reach USD 2,93 billion by 2025 and may expand to USD 6.69 billion by 2030, corresponding to a CAGR of approximately 18 % during 2025–2030.

However, alongside this strong growth in electric mobility comes a growing concern regarding fire and explosion risks associated with lithium-ion (Li-ion) batteries, the main energy storage component in EVs. This issue presents new challenges for fire prevention, firefighting, and rescue operations, particularly in the context of Vietnam’s developing technical infrastructure and limited emergency response capabilities, which are still in the process of improvement.

2. Structure of Electric Vehicle Batteries and Characteristics of Lithium-Ion Battery Fires

2.1 Structure of Electric Vehicle Batteries

Lithium-ion (Li-ion) batteries are currently considered the dominant energy storage technology in electric transportation due to their high energy density, long cycle life, and stable operational efficiency. Structurally, a typical Li-ion battery cell consists of four fundamental components: the cathode, anode, separator, and electrolyte. The cathode is commonly made from lithium–metal oxides, such as LiNiₓCoᵧMn₁₋ₓ₋ᵧO₂, LiNiₓCoᵧAl₁₋ₓ₋ᵧO₂, or LiFePO₄. The cathode material determines the nominal voltage, energy efficiency, and thermal stability of the battery. The anode typically uses graphite, which allows effective intercalation of lithium ions during charging and discharging. Recent studies have explored silicon, lithium titanate (Li₄Ti₅O₁₂), and composite materials to enhance specific capacity; however, these materials may exhibit swelling, reduced cycle life, and dendrite formation, which can lead to safety issues. The separator is an ultrathin porous polymer membrane that allows lithium-ion transport between the electrodes while maintaining physical separation. Its thermal strength, puncture resistance, and chemical stability play a crucial role in preventing internal short circuits. The electrolyte is typically a mixture of organic solvents (e.g., ethylene carbonate, dimethyl carbonate) with a dissolved lithium salt. Although electrolytes offer high ionic conductivity, they are highly flammable and thermally unstable, decomposing at elevated temperatures to release flammable or toxic gases.

In an EV battery system, multiple cells are assembled into modules, and several modules form a battery pack. Each pack is equipped with a Battery Management System (BMS) to monitor voltage, temperature, current, and state of charge balance among the cells. Additionally, active or passive cooling systems are integrated to maintain thermal stability and ensure operational safety during vehicle use.

2.2 Characteristics of Lithium-Ion Battery Fires

Lithium-ion batteries, the main energy source in most electric vehicles, pose a significant fire and explosion hazard due to their high energy density, reactive chemistry, and sensitivity to temperature. Battery fire and explosion incidents are primarily triggered by thermal runaway, a self-accelerating process in which the internal temperature rises beyond safe limits, initiating exothermic chemical reactions that release large amounts of heat, potentially resulting in fire or explosion [1], [2].

Li-ion battery failures generally stem from three major causes: Mechanical failures such as impacts or penetrations that damage the separator; Electrical failures such as overcharging, over-discharging, or internal short circuits; and Thermal failures caused by external heating or inefficient cooling systems [3]. When a severe fault occurs, internal thermal reactions can escalate rapidly, leading to combustion, explosion, and potential propagation to adjacent cells. The following features distinguish Li-ion battery fires from conventional fires:

  • Thermal runaway feedback: When internal short circuits, overcharging, or mechanical damage occur, the temperature within a cell rises rapidly. Once it surpasses a critical threshold, the rate of heat generation exceeds heat dissipation, forming a positive feedback loop—the higher the temperature, the faster the reactions, generating even more heat.
  • Heat propagation among cells/modules: Battery packs consist of densely arranged cells within modules. If one cell undergoes thermal runaway, the generated heat can spread to adjacent cells if thermal insulation or dissipation is inadequate, leading to chain reactions throughout the module or pack.
  • High heat release rate: Once thermal runaway begins, temperatures can rise by several hundred degrees Celsius within seconds. Heat is released not only from electrode reactions but also from the decomposition of electrolytes, separators, and additives.
  • Emission of flammable and toxic gases: During decomposition, the cell releases gases such as CO, CO₂, H₂, light hydrocarbons, and toxic HF (produced from the decomposition of LiPF₆ or fluorinated additives). These gases increase internal pressure and can ignite when exposed to external ignition sources.
  • Jet flames and venting sparks: When internal pressure exceeds the containment limit, the safety vent ruptures, releasing hot gases under pressure. These vapors may ignite, creating jet flames or sparks, which can lead to rapid flame spread across the entire module or pack.
  • Challenges in post-fire control: Battery materials have low thermal conductivity, causing retained internal heat even after surface cooling, making complete extinguishment difficult; Re-ignition may occur after initial suppression if damaged cells remain unstable; Fires can damage other vehicle components, spreading to wiring systems, hybrid fuel systems, or flammable interior materials.

3. Evaluation of Firefighting Effectiveness and Proposed Solutions for Electric Vehicle Battery Fires in Vietnam

3.1 Evaluation of Fire Suppression Effectiveness of Common Extinguishing Agents

Experimental studies have demonstrated that lithium-ion (Li-ion) battery fires exhibit distinct thermochemical behaviors compared to conventional material fires. Battery fire incidents typically occur in confined and hard-to-reach spaces, accompanied by sudden temperature surges, jet flames, high heat release rates, and the emission of toxic gases such as CO, CO₂, HF, and CH₄.

At the initial stage of heat release, when the temperature rises to approximately 90–120 °C, the solid electrolyte interface (SEI) begins to deteriorate, allowing the anode to react directly with the electrolyte solution. Beyond 130°C, the separator may melt, leading to internal short circuits within the cell. The rate of temperature increase can reach 100 °C per second, with peak cell temperatures approaching 1,000 °C. Even after extinguishment, the core temperature may remain extremely high, creating a significant risk of re-ignition.

With the ongoing development of new-generation batteries featuring higher energy densities and voltages, the selection criteria for extinguishing agents must comprehensively consider electrical insulation, cooling performance, suppression efficiency, toxicity, residue generation, and deployment cost.

A comparative assessment of common extinguishing agents reveals the following characteristics:

  • Water-based solutions: Provide excellent cooling capability, particularly when combined with additives such as F-500. However, poor dielectric properties may cause short circuits or secondary ignition, especially in high-voltage battery modules.
  • Water mist systems: Offer better effectiveness than traditional sprinkler systems due to the formation of fine droplets and reduced electrical conductivity. Nevertheless, for energy storage systems (ESS) with thousands of volts, additional safety validation is required.
  • Gaseous agents such as liquid nitrogen, C₆F₁₂O, HFC-227ea, and CO₂ minimize the risk of electrical faults. Among these, liquid nitrogen exhibits the highest cooling capacity. However, some gases (e.g., C₆F₁₂O, HFC-227ea) may decompose at elevated temperatures, releasing toxic HF gas that is harmful to human health and electronic equipment.
  • Dry powder and aerosol agents often leave corrosive residues, potentially causing further cell degradation or component damage.
  • Toxicity and residues: Most extinguishing agents are generally low in toxicity, except for HFC-227ea, which has a high Global Warming Potential (GWP). Special attention must be paid to HF emissions from certain gaseous agents at high temperatures, as well as conductive residues from powders and aerosols.
  • Cost considerations: Water and liquid nitrogen are relatively low-cost but require complex operational and storage systems. C₆F₁₂O and aerosol systems are the most expensive, followed by HFC-227ea and CO₂.

Overall, there is no single extinguishing agent that provides optimal performance for all types of Li-ion battery fires. The choice of extinguishing medium should depend on the system voltage, battery pack configuration, environmental conditions, and the capabilities of local firefighting units, to ensure both fire suppression efficiency and personnel safety.

3.2 Proposed Firefighting Solutions for Electric Vehicle Battery Fires in Vietnam

As analyzed in Section 2, uncontrolled thermal runaway within a cell or battery pack is an exceptionally hazardous condition that may result in overheating, fire, or explosion. In such cases, conventional extinguishing agents often prove ineffective due to the inaccessible location of EV batteries—typically mounted within the vehicle chassis or underbody—which limits the agent’s penetration into the combustion zone.

Given the rapid growth of EV adoption in Vietnam, particularly in mixed parking facilities where electric and conventional vehicles are parked in close proximity, the risk of fire propagation is a major concern. In densely populated parking structures, the abundance of combustible materials means that a single EV battery fire could rapidly spread to adjacent vehicles.

Currently, both in Vietnam and globally, there are no specific standards or guidelines regarding the layout, compartmentation, and isolation of areas designated for EVs, including charging zones for electric cars and motorbikes, distribution cabinets, and transformers serving charging stations. Most installations share electrical infrastructure with the main building systems, which increases the risks of overloading, arcing, and overheating at busbars, potentially leading to electrical fires or explosions. Notably, dedicated fire-rated compartments or isolation barriers for EV parking zones - where large Li-ion battery systems are concentrated - are not yet defined in current construction standards. To enhance the effectiveness of fire suppression in EV- or battery-related incidents, it is essential to combine passive fire containment measures with appropriate extinguishing agents that provide electrical insulation, cooling, and re-ignition control.

In addition to extinguishing agents, the study proposes the use of fire blankets to isolate and control EV fires, minimizing collateral damage to the surrounding environment. High-temperature-resistant car fire blankets (withstanding up to 1,600°C, ISO EN 13501-1) are prioritized for their ability to prevent fire spread. These specialized blankets are widely used internationally for rapid and safe containment of vehicle (especially EV) fires. While such blankets cannot fully extinguish EV battery fires, they confine the flames, limit heat radiation, and prevent fire propagation to nearby vehicles or structures.

Additional complementary methods include:

  • Aerosol suppression systems: These interrupt the chemical chain reactions of combustion. Nano-sized potassium-based aerosols can penetrate deep into open structures and inhibit internal combustion reactions within Li-ion cells, effectively reducing temperature and flame intensity.
  • High-pressure water mist systems: These generate ultra-fine water droplets to spray over the fire blanket, helping to reduce smoke and toxic gases, while providing localized cooling.
  • High-expansion foam systems: As an alternative to fire blankets and mist systems, foam can be used to cover the entire fire area, creating a cooling water film to prevent flame spread. However, foam systems cannot fully extinguish active battery combustion within the cells.

Beyond these active firefighting measures, the installation of thermal imaging surveillance cameras is highly recommended to enable continuous monitoring of temperature variations in parking facilities and charging areas. Such systems significantly enhance early detection, risk assessment, and emergency response efficiency in EV fire incidents.

4. Conclusion

Lithium-ion batteries provide substantial advantages for the electric vehicle industry but also pose significant fire and explosion hazards due to their complex chemical reactions and high operating temperatures. In the context of Vietnam’s rapid transition toward electric mobility, the development and implementation of specialized firefighting strategies for EV battery incidents are of urgent importance. This study presents and evaluates fire suppression solutions for electric vehicle battery fires, emphasizing both the technical effectiveness of various extinguishing agents and the integration of containment measures such as fire blankets, aerosol systems, and water mist technologies. The proposed approaches aim not only to enhance emergency response capabilities but also to contribute to the establishment of a safe and sustainable electric vehicle ecosystem in Vietnam.

References

[1] D. Ren, X. Feng, X. Lu, L. He, R. Ren, and M. Ouyang, “A review on thermal management of lithium-ion batteries for electric vehicles,” Energy Storage Materials, vol. 19, pp. 133–150, 2019.

[2] M. Feng, D. Ren, X. He, and M. Ouyang, “Thermal runaway mechanism of lithium-ion batteries for electric vehicles: A review,” Energy Storage Materials, vol. 10, pp. 246–267, 2018.

[3] J. Sun, M. Ouyang, X. Lu, L. Li, F. Ren, and X. Feng, “Safety of lithium-ion batteries: Current status and future perspectives,” Energy & Environmental Science, vol. 13, pp. 2024–2066, 2020.

[4] Precedence Research, Electric Vehicle Market Size, Share, Growth, Report 2024–2033, Precedence Research, 2024.

Есть что обсудить?
Оставьте комментарий — автор и читатели увидят его в обсуждении.